Throttle Cable

["Tom Brown" <tbrown@xxxxxxxxxxx>]

Clive:

I think there is a seperate cable between the two throttle bodies on the
older Oilheads.   It's not one long cable going to both sides.  Two seperate
cables.  Two part numbers.

>Peter and Tom,

>Tom has given you very good advice.  However, when (if) you get the new
cable you will notice that it comes in one "piece" which wraps around the LH
pulley and goes on to the RH pulley.  Nipples locate in each pulley.

- -TB

------------------------------