Re: 4-Pin RJ11 Modular Plugs for Valentine Detector

[Joel Webb <joel_slash5@xxxxxxxxx>]

Barry,

The RJ11 is a standard and you should be able to use
any supplier (Lowes, Home Depot).  Do you need a cord
with an RJ11 on each end?  If so I will make you a
cord and send it to you if you give me the length you
need.  I dont know what type of setup you have but I
use the Valentine remote power source for mine and
have a cord that is about 4 inches long to supply
power.  

Regards,
         Joel Webb
- --- "Barry P. Blank, Ph.D." <psychb@xxxxxxxxxxxxx>
wrote:
> Prezzes & Prezzettes,
> 
> The 4-Pin RJ11 modular plug for my Valentine Radar
> Detector has snapped 
> off the little 'thingee-lever' that holds it in. 
> Duct tape holds it in 
> now, but not exactly a clean install.  Replacement
> modular plugs from 
> Radio Shack are just too large - they can be force
> fit in but do not 
> come out. Since I swap the Valentine out between my
> bike and car I need 
> the right size.
> 
> Valentine has none available (just extension cords
> with pre-existing 
> crimped plugs - no help) and Verizon hardly knows
> what I'm talking 
> about!  A google search turns up several sources and
> I would gladly 
> order, but I still do not know if they would fit
> properly.
> 
> Does anyone have any thoughts about a local-type
> store where I can get 
> these plugs (Home Depot and Sears have not worked)
> or access to one or 
> more?  TIA
> 
> -- 
> Regards,
> 
> Barry ('04 R1150RT)
> Roslyn Heights, N.Y.
> 
> Ride hard and ride well.

------------------------------