[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Mounting my 2610
- Subject: Re: Mounting my 2610
- From: Robert Silas <robert.silas@xxxxxxxxxxxx>
- Date: Fri, 25 Jun 2004 22:34:37 -0400
Eckhard,
Take a run up to my house and have a look how I combined the top portion of the lockable mount of Touratech and the 5" long RAM arm for the bottom part of the connection. I just completed a 16,000 km trip and I had the 2610 on the bike all along.
What ever you do, I suggest to mount it as high as possible. You should not look down to se the GPS, it's dangerous. I started out with a low mounting position then I changed it to higher up before my next ride.
Call me: 514-998-6903
Bob Silas
----- Original Message -----
From: Eckhard Grohe
To: oilheads@xxxxxxxxx
Sent: Friday, June 25, 2004 7:25 AM
Subject: Mounting my 2610
Hi all:
I have an RT with a RCU like shelf and I would like to mount my Garmin 2610
on the shelf. I have the Garmin mount but have heard tthe unit can pop out
of this. Any suggestions or experience to share?
Thanks in Advance
Eckhard.
------------------------------
End of oilheads-digest V1 #222
******************************