[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Synchin TB and now popping?
- Subject: Re: Synchin TB and now popping?
- From: rennsport@xxxxxxxxx
- Date: Sun, 13 Mar 2005 17:02:29 -0500
On Mar 13, 2005, at 4:41 PM, Brian wrote:
> OK first time to do any of this but it shouldn't be a problem with my
> mechanical background. I adjusted the valves no problem and now I
> hooked up some vac. gages. I've adjusted them to within 1/4" and when
> hot the bike seems to run just fine. I just went out and fired it up
> and it's snap, crackle and pop? I'll rehook up the gages and see
> what's happening but I'm thinking I'll try out the 0=0 method if this
> is not going to work. Any thoughts? Bueller?
> Brian Diver
> PDQ Signs Everett, WA www.pdq-signs.com
Check to make sure the the throttle cables at the TB end are fully
seated in the barrels. This is most likely the cause of the popping
04 Yamaha FZ6
It's not an addiction unless you are trying to quit...