Re: Re: New Guy

["Fritz Curtis" <fritzc@xxxxxxxxxxxxx>]

- ----- Original Message ----- 
From: "John Van Deren" <r11rider@xxxxxxxxxxx>
To: <oilheads@xxxxxxxxx>
Sent: Monday, September 19, 2005 9:18 AM
Subject: Re: Re: New Guy


> Fritz,
>
> Use this link to an IBMWR tech piece on replacing the disk rollers.  I did 
> this on my 94 RS, and the rattling disappeared.  These instructions are 
> for the K bike, but the process is the same...don't remember if part 
> numbers are also the same (think they are but check).
>
> http://ibmwr.org/ktech/floating-disk-rollers.shtml
>
> John Van Deren
> Montpelier, VT


Thanks John,
Post was printed and stored in my Clymer's manual.
Fritz 

------------------------------

End of oilheads-digest V2 #219
******************************