[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: aligning the wheels

At 10:23 AM 10/1/2007, Robert Silas wrote:
I have a '94 RS, they call them the Beta-bikes. Yes it was out. BMW does not
say which way is the 9 mm applies. Now I placed it 6 mm towards the drive,
that is 6 mm from the factory setting. It is 9.5 mm towards the drive from
the center-plane of the front wheel. Still pulling a bit to the right, so I
am still at it.
Bob Silas

The +/- 9mm is just that. The front wheel can be right or left of the centerline
of the rear wheel.  If it's off, there is something bent.