[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Notchy steering bearing

Davis, you wrote:
"There are two ball joints.  One on the telelever and one under the top
Now I have not BTDT but according to the manual I believe this is valid only
for the early? RSs and all other models have a  "thrust" ball bearing
arrangement with the angular displacement being taken up by "pot?" type
joints at the top of the tubes.
Clive Liddell

- ----- Original Message -----
From: Davis Eichelberger <davis@xxxxxxxxxxxxxxxxx>
To: <oilheads@xxxxxxxxx>
Sent: Tuesday, November 11, 2003 2:47 PM
Subject: RE: Notchy steering bearing