RE: brake faults

["customtankbags" <customtankbags@xxxxxxxxx>]

If you just want to reset the error, the technique is as follows:

Locate the blue diagnostic plug under the seat and uncover it.  Using a
piece of wire about 18" long, put one end in the center socket and hold the
other against something grounded.  On my RT, I use one of the heavy bolts
down on the right side near the rear brake.  While holding, turn on the key
and hold down the ABS switch for 8-10 seconds.  When you release, the ABS
lights should have stopped flashing alternately and you're good to go.

If this happens repeatedly, check the gap of the ABS sensors and/or take it
to a dealer to check out.

Good Luck,
LindaT.
http://www.customtankbags.com
Now - TankBags for 1800 Wings
Hollywood, FL
AMA IBA HSTA BMWBMW
99 R1100RT Mr. Buzzy
95 F3 Purple Haze
00 KLR250 Super Sherpa Tenzing

------------------------------

End of oilheads-digest V1 #264
******************************