[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Techlusion, CO Pots etc.
- Subject: RE: Techlusion, CO Pots etc.
- From: "Davis Eichelberger" <davis@xxxxxxxxxxxxxxxxx>
- Date: Thu, 27 Jan 2005 08:39:45 -0500
> -----Original Message-----
> From: owner-oilheads@xxxxxxxxx [mailto:owner-oilheads@xxxxxxxxx] On Behalf
> Of william kenney
> Sent: Thursday, January 27, 2005 07:18 AM
> To: oilheads@xxxxxxxxx
> Subject: Re: Techlusion, CO Pots etc.
> > If my memory serves me correctly, the 'R' has the same intake tubes as
> > the RT's and RS's, so this wouldn't help (the original post was for an
> > R1150R).
> You are correct, the R does have the same tubes as the RS and RT.
> That is why you will see a major difference when you switch these tubes to
> "GS" intake tubes. The GS are longer and slightly different
> Bill Kenney
> Formerly 96 R1100RS
Sorry Bill, but you're wrong and Wayne is correct; the RT and RS share the
shorter high power tubes and the GS and R share the longer tubes which help
provide the low end torque. Installing GS tubes on an R would accomplish
nothing as you would be replacing the tubes with the same.
ex '95 R1100R