Re: Techlusion, CO Pots etc.

["william kenney" <tnt720@xxxxxxxxxxxxxxxx>]

- ----- Original Message ----- 
From: "Wayne Woodruff" <wayne@xxxxxxxx>


> ><<4. A change of those black  plastic intake tubes to the ones made for a 
> >GS
>>really smooths out 1100 RTs  and RS's.  It also gives more torque at low 
>>and
>>mid revs at a slight  cost to ultimate power at high revs.  I don't know 
>>how
>>you ride, but  I've found that I run near redline very seldom and this is 
>>not
>>much of a  concern for me.  I'm not sure how this mod works on 1150s. 
>>Not
>>needed at all with twin spark.>>
SNIP


> If my memory serves me correctly, the 'R' has the same intake tubes as
> the RT's and RS's, so this wouldn't help (the original post was for an
> R1150R).
>

You are correct, the R does have the same tubes as the RS and RT.
That is why you will see a major difference when you switch these tubes to 
"GS" intake tubes. The GS are longer and slightly different configuration..

Bill Kenney
Foster,RI
02K1200RS

Formerly 96 R1100RS 

------------------------------