[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Techlusion, CO Pots etc.
- Subject: Re: Techlusion, CO Pots etc.
- From: Wayne Woodruff <wayne@xxxxxxxx>
- Date: Thu, 27 Jan 2005 16:52:29 -0500
>> > If my memory serves me correctly, the 'R' has the same intake tubes as
>> > the RT's and RS's, so this wouldn't help (the original post was for an
>> > R1150R).
>> You are correct, the R does have the same tubes as the RS and RT.
>> That is why you will see a major difference when you switch these tubes to
>> "GS" intake tubes. The GS are longer and slightly different
>> Bill Kenney
>> Formerly 96 R1100RS
>Sorry Bill, but you're wrong and Wayne is correct; the RT and RS share the
>shorter high power tubes and the GS and R share the longer tubes which help
>provide the low end torque. Installing GS tubes on an R would accomplish
>nothing as you would be replacing the tubes with the same.
In my original reply I mistyped, but my conclusion was correct.
My original post said the R tubes were the same as RS and RT and I
meant to write R tubes are the same as GS tubes.
As has been stated, replacing the R tubes with GS tubes will have no
affect, since they are the same tube.
Sorry for the confusion. That's what happens when I type at 6AM.
2000 BMW R1100R (2ZARS)
1956 Matchless G11 (J86)