[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Zenier Diode and Crossover Tubes
- Subject: Re: Zenier Diode and Crossover Tubes
- From: Wayne Woodruff <wayne@xxxxxxxx>
- Date: Mon, 31 Jan 2005 17:17:37 -0500
>AIR FILTERS:
>As to alternative air filters, you should know that the air filter box is the
>limiting factor on these bikes, not the filter itself. You can put a K&N on
>your bike and it will do nothing. You have to modify the air box to get an
>effect. Then change the exhaust and remove the 02 sensor...then maybe a
>variable voltage device on the TPS circuit would be worth having. In the
>end, you'll get a bit more ultimate power, at a sacrifice to low-end
>torque....sort of the opposite effect that the GS intake tubes have. Put me
>in the camp that likes strong mid range torque and isn't completely crazy
>about HP numbers. Also put me in the camp that wants a well made air filter
>with no leaks in the gaskets. These are 100,000 - 200,000 mile bikes. A
>good filter is a good thing.
>
Here's some DATA to backup the "K&N does nothing" claim and a bunch of
other tests with CCP's
http://www.monmouth.com/~deilenberger/R1100R/index.htm
Wayne I-don't-surge-because-of-techlusion Woodruff
Wayne Woodruff
http://www.jtan.com/~wayne
Chalfont, PA
2000 BMW R1100R (2ZARS)
1956 Matchless G11 (J86)
------------------------------