Re: Synchin TB and now popping?

["william kenney" <tnt720@xxxxxxxxxxxxxxxx>]

- ----- Original Message ----- 
From: "Brian" <brian@xxxxxxxxxxxxx>
To: <oilheads@xxxxxxxxx>
Sent: Sunday, March 13, 2005 4:41 PM
Subject: Synchin TB and now popping?


> OK first time to do any of this but it shouldn't be a problem with my 
> mechanical background.  I adjusted the valves no problem and now I 
> hooked up some vac. gages.  I've adjusted them to within 1/4" and when 
> hot the bike seems to run just fine.  I just went out and fired it up 
> and it's snap, crackle and pop?  I'll rehook up the gages and see what's 
> happening but I'm thinking I'll try out the 0=0 method if this is not 
> going to work.  Any thoughts?  Bueller?
> 

Check to make sure the cable ends are seated correctly in their sleeves.
Bill Kenney
Foster,RI
02K12RS

------------------------------