[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Synchin TB and now popping?

At 1:41 PM -0800 3/13/05, Brian wrote:
>OK first time to do any of this but it shouldn't be a problem with 
>my mechanical background.  I adjusted the valves no problem and now 
>I hooked up some vac. gages.  I've adjusted them to within 1/4" and 
>when hot the bike seems to run just fine.  I just went out and fired 
>it up and it's snap, crackle and pop?  I'll rehook up the gages and 
>see what's happening but I'm thinking I'll try out the 0=0 method if 
>this is not going to work.  Any thoughts?  Bueller?
>Brian Diver
>PDQ Signs   Everett, WA www.pdq-signs.com

What model bike, and what year? within 1/4 inch vacuum at what engine 
speed(s)? 0=0 works for 1100 engines, not for 1150s, which require 
similar but different approach.

Look at http://www.advider.com in the "hall of wisdom" for articles 
that address synching.

- - andrew