Re: Digital read-out and radial tires

[Robert Silas <robert.silas@xxxxxxxxxxxx>]

John,
Do you mean that you installed the RID and then you un-installed it???
I need a new neutral switch, so this is the time to install the new switch plus the gear sensor.  Do you NOT recommend the installation of a RID panel?????

I hope you will come and see the straighten out and reinforced back-frame on my RS.  I have no program for this weekend, I am completely free.
Bob
  ----- Original Message ----- 
  From: John Van Deren 
  To: oilheads@xxxxxxxxx 
  Sent: Friday, November 11, 2005 8:26 AM
  Subject: Re: Digital read-out and radial tires


  Hi Bob,

  I just went through the process of installing a used RID panel on my RS 
  which, like yours, did not come with one.  When I replaced my clutch two 
  years ago, I forgot about adding the gear position sensor to the neutral 
  switch in case I was going to add the RID in the future.  So, even 
  though the plug for clock, oil temp and fuel level is there and works, 
  you won't get the gear position without adding that rear sensor 
  pigtail.  I got tired of the innacurate fuel level indicator and finally 
  went back to my old set up!

  Hope to see you this weekend!

  John Van Deren
  Montpelier, VT

  Robert Silas wrote:

  >Some questions for the experts regarding a:
  > '94 R1100RS with ABS, no digital read-out panel, Canadian model.
  >
  >1.)  is the neutral switch identical with the neutral switch + digital read-out switch???
  >2.)  is it possible to install digital read-out panel for this RS???
  >
  >The following is not a question for this "R" list but T.P. Cutter may know the answer: 
  >Regarding a '92 K75s:
  >Is anybody has experience of mounting radial tires on this bike???
  >The bike came with bias tires.
  >Would this K75s be more stable in turns with radial tires???
  >Could somebody advise me how to subscribe onto the "K" list???
  >Thanks for your responses in advance.
  >Bob Silas
  >'94 R1100RS
  >'92 K75s

------------------------------