[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Feeler Friction

Geez, Tom, after that long letter I wrote in your behalf about semantics not 
being the point of this list.

I hope my friend didn't set his valve clearance at 30 mm.

I know that the yellow feelers have a big "30" on them and the white ones 
have a big "15" on them.   30s for the side with the exhaust pipe.

Anyway, Tom's right.  It's .15MM, not 15 and it's .30MM, not 30.

Next time someone flame you for some little pissant point about spark plug 
threads, you're on your own!!!

- -TB

>Date: Fri, 11 Nov 2005 16:21:12 EST
From: Tpcutter@xxxxxxx
Subject: Re: Feeler Friction

In a message dated 11/11/05 4:06:03 PM Eastern Standard Time,
tbrown@xxxxxxxxxxx writes:
CONCEPT II:   The Exhaust valves   always have more clearance (30MM) than 
intake valves (15MM).    >>

YOW! Maybe you could edit that to read 0.15 mm and 0.30 mm?

Tom  Cutter


End of oilheads-digest V2 #267