[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Turn signal availability

Go to http://www.maxbmwmotorcycles.com/fiche/fiche.asp .  It will 
provide all the part numbers you could want.  Also possible to mail 
order from them, or any number of other dealers around.

Bob Hadden '05R12GS, '62R27

On Nov 19, 2005, at 7:15 AM, RSRiding@xxxxxxx wrote:

> On my '94 R1100RS, the inside white plastic part of the left rear turn 
> signal
> appears to have overheated and deformed slightly. This led to the bulb 
> not
> working as it should. The PO installed an aftermarket aux braking 
> light system
> which converts the rear turn signals to running lights as well as 
> flashing when
> the brakes are applied.
> I need to replace that inside portion of the turn signal. I have no 
> problem
> going down to the local shop (after several years of not having a shop 
> in the
> area, the Triumph/Moto Guzzi/Vespa/Ducati dealer picked up the BMW
> franchise...yea!), but before I do that, I just wanted to see if any 
> of you fine folks had
> that part in a drawer that you'd like to recycle for some cash.
> Thanks,
> Geoffrey Greene
> Knoxville, Tennessee USA


End of oilheads-digest V2 #277