[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Brake problems.
- Subject: Re: Brake problems.
- From: Tpcutter@xxxxxxx
- Date: Wed, 7 Sep 2005 21:32:50 EDT
In a message dated 9/7/05 8:53:03 PM Eastern Standard Time,
absdoug@xxxxxxxxx writes:
I get a nice firm squeeze EVERY time if I give a quick squeeze. Any other
suggestions?
Many times a rebuild will not fix the pitting in the master cylinder bore.
Steady pressure will allow oil to pass the seals at the pits. Are you gettign
ANY oil past the seal? Sometimes it is hard to see until it accumulates a lot.
Tom Cutter
Yardley, PA
http://www.RubberChickenRacingGarage.com
------------------------------