[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

oil change question

Was reading up on oil changes since I'm about to do mine...

On ibmwr.org there's an oilhead maintenance .pdf dated 2-25-02

I have a question about steps 11 and 14 on page 23. Is #14's "3.75  3.9 
qts" including the oil that was put in the filter at #11, or IN ADDITION TO?

11. Fill the new oil filter with fresh oil.
12. Apply a thin coat of oil to the new oil filter rubber gasket.
13. Install the new oil filter and give it > - 1 turn after first contact.
14. Add 3.75  3.9 qts. of oil total (NOT 4 qts.!!!) using a funnel or 
oil spout.