[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Front shock replacement on R1150R.
- Subject: RE: Front shock replacement on R1150R.
- From: "Minor, Bob" <Bminor@xxxxxxxx>
- Date: Wed, 15 Feb 2006 07:10:24 -0800
Many folks have simply removed the canister all together. Instructions
can be found on the IBMWR site.
- -----Original Message-----
From: owner-oilheads@xxxxxxxxx [mailto:owner-oilheads@xxxxxxxxx] On
Behalf Of Pete Schinkel
Sent: Tuesday, February 14, 2006 5:48 PM
To: oilheads@xxxxxxxxx
Subject: RE: Front shock replacement on R1150R.
Marc and Martin:
Thanks for the information on the routing of the vent hoses. I could
not find and "xxxxxxxx" on either hose, but since one spit raw gas when
I remounted the tank, I am guessing that one goes to the charcoal
canister. I guess the worst that could happen is that I will have wet
charcoal and global warming will arrive quicker.
BTW, the Wilbers front shock makes my 02 with 24K miles ride like a new
bike, maybe better than new. The OEM shock must have been really sacked.
The rear still seems OK but I may replace it just to see if there is an
improvement.
Thanks,
Pete Schinkel
02 R1150RA Yellow Jacket
------------------------------