Re: main beam / dipped beam

["Jim Lundberg" <jiml@xxxxxxxxxxx>]

Thanks Clive.

I'll let you know what I find.

A bunch of us form Ficksburg (mostly BM's) will be attending the Mustang 
Rally in Mooi River, first weekend in August.  Perhaps we can meet up at 
that time.

We are interested to plan a +/- 500 km ride for the Saturday, if possible 
returning through Underberg.

Regards,
Jim

- ----- Original Message ----- 
From: "Clive Liddell" <cliddell@xxxxxxxxxx>
To: <oilheads@xxxxxxxxx>
Sent: Wednesday, June 07, 2006 12:41 PM
Subject: RE: main beam / dipped beam


Hi Jim,
We still have to arrange that meeting!

Our arrangement is different to most US bikes (which are always ON).

I suggest first just try exercising the on/off switch (RH side) vigourously
a few times and that should do the trick.

HTH

Regards
Clive Liddell
PMB, South Africa
R850R
R1100RT

- -----Original Message-----
From: owner-oilheads@xxxxxxxxx [mailto:owner-oilheads@xxxxxxxxx] On Behalf
Of Jim Lundberg
Sent: 07 June 2006 06:05
To: oilheads@xxxxxxxxx
Subject: main beam / dipped beam

While out riding my 97 R1100R last weekend, both main and dipped beam
failed.

Initial inspection reveals that neither bulb nor fuses are blown.  The main
beam will however work if I hold down the "flasher".  I have started to
suspect that perhaps there is a relay involved and that this might be
faulty.

Does anyone have a wiring diagram for this model, or experience of a similar
problem?

Regards, Jim
Ficksburg, South Africa

------------------------------

End of oilheads-digest V3 #90
*****************************