Re: Hate to beat this to death: Wire harness repair

[Wayne Woodruff <wayne@xxxxxxxxx>]

On Sun, 2 Jul 2006 20:15:34 -0700 (PDT), you wrote:

>   I was hoping to get some more specific information about removing/replacing connections/pins for my wire harness. I got some general info, but nothing specific. If I want to remove the pins/connector associated with the fuse box, which would I use? What about the connectors associated with the relays, which have two different size connectors/pins. The H.E.S.? The connections with the ignition switch harness? I'm lost as to what I would need.
>     I have a spare wire harness & I've always been interested in isolating the wires that make the bike go, from everything else. I also have some repairs that really need to be done right on the current harness.
>

Here are a couple of pages on generic removal of cables from
connectors.  I'm not sure exactly what type of pins/connectors you
have.   

http://marvin3m.com/connect/

http://www.bytesector.com/data/bs-article.asp?ID=295&page=7

Wayne Woodruff
http://www.2zars.com

------------------------------