Re: Autolite 3923 washer

[Mark Rivera <marr@xxxxxxxx>]

Thanks, all, for the instruction to keep the washers on when installing 
the plugs. The packaging had advice for the fraction of a turn that 
should be applied after 'finger tight', and gave different amounts based 
on whether or not the washer was to be used for the particular motor 
(gasket seat vs tapered seat). It made me wonder. As for the 
'finger-tight' method, I'll be using a torque wrench instead.

Thanks also for the advice to resist using anti-seize, I had a bottle 
sitting there ready to go.

Mark

------------------------------